BeamRider

Fleet US Beamrider

What IS the BeamRider, anyway?

SEE THE VIDEO.

The BeamRider uses laser technology to give speed, precision and quality of finish time after time. String lines are a thing of the past; the laser projected at 90 degrees gives the perfect corner every time. The BeamRider system has been developed with simplicity, control, and ease of use in mind.

It eliminates any risk of error with the automatic cut-off system. If the operator deviates too far from the laser beam the spray marker is instantly switched off. The BeamRider is not limited to sports field marking; it can be utilized for anything that needs to be marked straight and square, and normally allows the job to be done in half the time whilst removing stress from the process of trying to paint straight lines. There is no better way of finishing a professionally maintained field than to paint perfect, laser-straight lines on it. Perfection every time!

Here's how it works:

Set the laser at the corner of any rectangle.
Position the BeamRider close to the laser.
Activate the tracking. The receiver will then lock onto the beam.
Turn on the spray marker and off you go!

Top

Key advantages:

Quick setup
Quick operation
Perfect lines every time
No more string lines
Multi-surface operation
Automatic cut-off
removes human error
Huge time savings

Top

BeamRider™ SX
(for the Kombi)

2 Laser transmitters and telescopes
(1 90-degree and 1 single laser unit)
1 fully protective carry case for transmitters
2 Goal alignment reflectors
2 Reflector plates
2 Transmitter base plates
1 Battery charger for transmitters
1 Actuator unit
(receiver and tracking arm)
1 Kombi spray unit
1 Battery charger for Kombi unit
1 Knib (paint nozzle and guidance assembly)
1 Instruction manual for laser system
1 Instruction manual for Kombi unit
1 Year manufacturers warranty
Telephone support line

What support will I receive?

Comprehensive user manual that includes diagrams, text and technical information
Telephone helpline and guaranteed call back within 12 hours (world-wide)
Benefit from a world-wide dealer support network
Individual or group training can be arranged at extra cost

Extra Purchase Items

All system components are available "off the shelf"
Additional transmitters
Additional reflector plates
Additional goal alignment reflectors
Additional spray knibs
Additional battery chargers

Top

BeamRider™ RX (for Ride-On Systems)

The BeamRider RX is a combination of the SX system and the Fastliner 40-gallon tank unit with the addition of an electric Knib lift. When attached to your utility vehicle, this equipment becomes an extremely productive high-speed striping system, ideally suited to the multi-field facility or contractor.

2 Laser transmitters and telescopes
(1 90-degree and one single laser unit)
1 fully protective carry case for transmitters
2 Goal alignment reflectors
2 Reflector plates
2 Transmitter base plates
1 Battery charger for transmitters
1 Actuator unit (receiver and
tracking arm)
1 Fastliner 150 liter
(40 gallon) paint tank
1 Electric lift for knib
1 Knib (paint nozzle and guidance assembly)
1 Instruction manual
1 Year manufacturers warranty

What support will I receive?

Comprehensive user manual that includes diagrams, text and technical information
Telephone helpline and guaranteed call back within 12 hours (world-wide)
Benefit from a world-wide
dealer support network
Individual or group training can be arranged at extra cost